：TU auto partsfactory in China : +85363493798
：TU auto partsfactory in China : +85363493798
Views: 0 Author: Site Editor Publish Time: 2025-02-24 Origin: Site
Inspection Frequency: It is recommended to conduct an inspection every 5,000 to 10,000 kilometers driven or every six months to ensure that any issues with the shock absorber mounting bushing can be detected in a timely manner.
Inspection Content: Mainly check whether the mounting bushing has signs of aging, cracking, deformation, or damage. At the same time, check whether the connection parts between the mounting bushing, the shock absorber, and the vehicle body are loose. If any abnormalities are found, repairs or replacements should be carried out promptly.
Avoid Overloading: Overloading the vehicle will subject the shock absorption system to excessive pressure, accelerating the wear of the shock absorber mounting bushing. Use the vehicle strictly according to its rated load capacity to prevent irreversible damage to the mounting bushing.
Slow Down When Passing Potholes and Speed Bumps: When encountering potholed roads or speed bumps, try to slow down in advance and let the vehicle pass slowly to reduce the impact on the shock absorber mounting bushing. Otherwise, repeated severe impacts will cause the mounting bushing to be damaged prematurely.
Avoid Turning the Steering Wheel While Stationary: Turning the steering wheel while the vehicle is stationary will subject the shock absorber mounting bushing to a large amount of torque, which is likely to cause wear and deformation of the mounting bushing. The steering wheel should be turned slowly while the vehicle is in motion to reduce damage to the mounting bushing.
Wash the Vehicle Regularly: Wash the vehicle regularly, especially the chassis part, to prevent impurities such as sand and dust from adhering to the shock absorber mounting bushing. These impurities may enter the gaps between the mounting bushing and other components, accelerating wear.
Clean the Mounting Bushing: You can gently wipe the shock absorber mounting bushing with a clean damp cloth to remove surface dirt and dust. If there is oil stain on the mounting bushing, a special cleaning agent can be used for cleaning, but be careful to avoid using cleaning agents with strong corrosiveness to prevent damage to the mounting bushing.
Avoid Long-term Outdoor Parking: Try to park the vehicle in an indoor parking lot or a sheltered place to avoid prolonged exposure to the sun or harsh weather conditions. Ultraviolet rays in the sunlight, rainwater, etc. will accelerate the aging of the mounting bushing.
Prevent Moisture: A humid environment is likely to cause the shock absorber mounting bushing to rust and mildew, affecting its performance. If the vehicle is parked in a humid place, regularly check the condition of the mounting bushing and take appropriate moisture-proof measures, such as placing desiccants at the parking location.
Apply Lubricating Grease: During the vehicle maintenance, apply an appropriate amount of special lubricating grease to the movable parts of the shock absorber mounting bushing. This can reduce friction, decrease the wear degree of the mounting bushing, and extend its service life.
Carry Out Maintenance as Specified: Strictly follow the requirements in the vehicle operation manual and conduct a comprehensive maintenance of the vehicle's shock absorption system regularly, including checking the performance of the shock absorber, replacing the shock absorber oil, etc., to ensure that the entire shock absorption system is in good working condition, thereby indirectly protecting the shock absorber mounting bushing.